Home About Us Products Contact Us Send Enquiry
 
OUR PRODUCTS
 
Shearing Machine & Plate Shearing
Cut-off / Sawing Machines
Bending Machines
Pressure Testing Machines
Abrasive Grinding Machine
Welding Machine
Electrical / Control Panel
Hand Tools / Cutting Blades
 
 
 
 
Shearing Machine & Plate Shearing
 
Hand Geared Shearing Machine (Economy Shear)  
 
SSS - 6G
Hand geared shearing machine, for cutting rods or plates, and priced below the line of bench shears it replaces. Cutting blades are fashioned from high temper carbon steel. Long handles provide leverage for easy cutting. Available in 9 sizes.

Shearing length is 80-85% of blade length.
  • Ideal Machine for shearing sheet, steel, bars and rods.
  • Hardened and Tempered replaceable blades.
  • Long handles provides plenty of shearing torque.
  • Comes with predrilled holes to bolt down to work bench.
  • Spare blades are also available.
  • Available in different colors

 

INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
SSS4G
100
1.5 40X4 8 - - -  
SSS6G 150 1.5 40X4 8 - - -  
SSS8G 200 2 40X5 10 - - -  
SSS10G 250 2 40X5 10 - - -  
SSS12G 300 2 50X4 10 - - -  
SSS14G 350 2 50X4 10 - - -  
SSS16G 400 2 50X4 10 - - -  
SSS18G 450 2 50X4 10 - - -  
SSS20G 500 2 50X4 10 - - -  
 
Hand Lever Shearing Machine (Bench Shear)
 
SSS-4/L

Hand LEVER shears, for cutting rods or plates, and priced below the line of bench shears it replaces. Cutting blades are fashioned from high temper carbon steel. Long handles provide leverage for easy cutting. Available in 8 sizes.

Shearing length is 80-85% of blade length.

  • Ideal Machine for shearing sheet, steel, bars and rods.
  • Hardened and Tempered replaceable blades.
  • Long handles provides plenty of shearing torque.
  • Comes with predrilled holes to bolt down to work bench.
  • Spare blades are also available.
  • Available in different colors.
  • For stainless steel materials capacities can be approximately taken to 40% .

Hand lever shearing machine or Bench Shears

  • A hand operated mechanism designed to cut metals with a minimum amount of force.
  • Cuts 1.6 mm sheet or 10 mm round wire stock of mild steel with minimal distortion of the metal
  • Precision machined construction
  • Four-sided reversible blades, made of high carbon steel, and tempered to perfection
  • Blades can easily be reversed and adjusted

 

INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
SSS-4/L
100
2 40X4 8 - - -  
SSS-5/L 125 2 40X4 8 - - -  
SSS-6/L 150 3 50X4 10 - - -  
SSS-8/L 200 3 50X5 11 -   -  
SSS-10/L 250 3 50X5 11 - - -  
SSS-12/L 300 3 50X5 12 - - -  
SSS-14/L 350 3 50X5 12 - - -  
SSS-16/L 400 3 50X5 12 - - -  
 
SC Sheet / Plate Shearing Machine (Heavy Duty)
 
S - 4 - 11/RG

INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
S4-7/RG
200
4 75X5 12 12 - -  
S4-9/RG 300 5 75X6 13 13 - -  
S4-11/RG 350 5 75X6 13 13 - -  
S4-137/RG 400 5 75X6 13 -   -  
S4-15/RG 450 5 75X6 13 - - -  
 
SC Plate, Angle, Bar & Section Shearing Machine (Combination Shearing Machine)
 
S - CSM/50

INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
S-CSM/50
175
6 50X8 12 12 12 50X6  
S-CSM/65 200 6 50X10 16 16 16 65X8  
S-CSM/75 200 6 50X10 16 16 16 75X9  
 
SC Plate & Bar Shearing Machine (Geared Type)
 
S4-11/RG
INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
S4-7/RG
200
4 75X5 12 12 - -  
S4-9/RG 300 5 75X6 13 13 - -  
S4-11/RG 350 5 75X6 13 13 - -  
S4-137/RG 400 5 75X6 13 - - -  
S4-15/RG 450 5 75X6 13 - - -  
 
SC Bar Shearing Machine
 
S - CRM/20
   
 
 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
S-CRM/12
50
- 25X6 15 15 - -  
S-CRM/15 60 - 40X6 18 18 - -  
S-CRM/20 65 - 40X10 22 22 - -  
 
SC "Z" Window Section Shearing Machine
 
S - CZSM
 
 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
S-CZSM
75
  25X5 - - 25X4 - -
 
SC Punched Angle Shearing M/C
 
S - PASM / 175
 
 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
S-PASM
100
- 75X3 - - 40X40X3 -  
S-PASM 175 - 75X3 - - 40X60X2 -  
 
SC Hand Geared Shearing Machine (HSS)
 
HSS 12G
Hand geared shearing machine, for cutting rods or plates, and priced below the line of bench shears it replaces. Cutting blades are fashioned from high temper carbon steel. Long handles provide leverage for easy cutting. Available in 9 sizes.

Shearing length is 80-85% of blade length.
  • Ideal Machine for shearing sheet, steel, bars and rods.
  • Hardened and Tempered replaceable blades.
  • Long handles provides plenty of shearing torque.
  • Comes with predrilled holes to bolt down to work bench.
  • Spare blades are also available.
  • Available in different colors.
INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.
 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
HSS-12G
300
3 50X6 12 - - -  
HSS-14G 350 3 50X6 12 - - -  
HSS-16G 400 3 50X6 12 - - -  
HSS-18G 450 3 50X6 12 -   -  
HSS-20G 500 3 50X6 12 - - -  
 
SC Hand Leaver Shearing Machine (Heavy Duty)
 
SSS-9/LD
Hand LEVER shears, for cutting rods or plates, and priced below the line of bench shears it replaces. Cutting blades are fashioned from high temper carbon steel. Long handles provide leverage for easy cutting. Available in 8 sizes.

Shearing length is 80-85% of blade length.
  • Ideal Machine for shearing sheet, steel, bars and rods.
  • Hardened and Tempered replaceable blades.
  • Long handles provides plenty of shearing torque.
  • Comes with predrilled holes to bolt down to work bench.
  • Spare blades are also available.
  • Available in different colors.
  • For stainless steel materials capacities can be approximately taken to 40% .

Hand lever shearing machine or Bench Shears

  • A hand operated mechanism designed to cut metals with a minimum amount of force.
  • Cuts 4 mm sheet or 13 mm round wire stock of mild steel with minimal distortion of the metal
  • Precision machined construction
  • Four-sided reversible blades, made of high carbon steel, and tempered to perfection
  • Blades can easily be reversed and adjusted

INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

 
Model
Blade/
Lenghth
Plate/ Sheet Flat Round Square Angle Tee Net. W.T. kgs.
SSS-9/LD
225
4 50X5 11 - - -  
SSS-13/LD 325 4 50X5 12 - - -  
SSS-15/LD 375 5 50X6 12 - - -  
SSS-17/LD 425 5 50X6 14 -   -  
 
 
 
Mini Sheet Metal Cutter
 
SMC-50

INSTRUCTIONS :
Prepare the sheet to be cut by marking a visible line with a marker or scriber. Position the sheet in the bench shear so that the marked line is positioned where the upper and lower blades meet. Pull down on the handle, making certain your fingers are clear of the blades. When the handle is pulled down, the material locking bar will keep the sheet from moving as it is cut. For cutting rods or plates up to 8 gauge (0.160”) (Varies with selected models).

CAUTION :
This bench shear should be bolted to a sturdy surface before using. As with any cutting tool, caution should be used at all times when operating this shear. Make certain that fingers are clear of the cutting blades before pulling down on the handle. This is especially important when cutting small pieces that require holding the material close to the blades.

 
 
 
 
 
Home    |     About Us     |     Products     |     Contact Us     |     Send Enquiry